Need the procedure to change the heater core on a '65 mustang?

This is not a difficult core to change, especially in a non A/C car as most '65's were. My best advise is to obtain a manual or go to the library and read up if they have an old Motor's or Chilton's manual for it. The other thing you might want to look at while there is the vent box condition as these cars have a history of rust caused water leaks from the vent intake. This would be easier to fix both at the same time while you are there. Good luck!
Need the procedure to change the heater core on a '65 mustang?
heater case comes out after glove box card board removal 6cyl cars have a bolt behind the cylender head [buy a cheap wrench and heat w/ a torch to bend to fit] i dont remember any v8 troubles unless it had ac added.
Need the procedure to change the heater core on a '65 mustang?
If you need additional help try this mustang forum it's great.
If its anything like my fairlane, and it should because the mustang was built using my car and t-bird tech, all your bolts should be on the firewall to remove the whole thing, then two cables, one electrical plug, then take that box apart, on your own with that, I only took it out, I didn't have to replace the heater core.

oppose drilling for oil

xp

Do i need to take off my dashboard in order to change the heater core in an 88 mustang?

Mustangs of that era are the worst to change the heater core. Get a repair manual. The dash will have to come out. It will actually be easier than trying to figure out how to do it with the dash in place.
Do i need to take off my dashboard in order to change the heater core in an 88 mustang?
Possibly, but usually accessible from under the dash,but you have to lay on your back a lot. Unhook the hoses from under the hood first.
Do i need to take off my dashboard in order to change the heater core in an 88 mustang?
Its supposed to come out, but it can sometimes be achieved by just taking some of the bolts ot and some loose then pull it back far enough to reach in and grab it. Becarefull not to break the dash.
I had a 1988 GT. There is no if, ands, buts, or maybes about this. The entire dash has to come out to get to that heater core. Don't use the replacement pieces from Ford, Autozone, or Advance. They are all garbage. Use the replacement part from NAPA %26amp; be sure you get restrictors for the new piece.
If you do not have factory air conditioning then then you remove the glove compartment door and there will be enough room to remove the heater core,if there is factory air conditioning then the entire dash will need removal and the AC needs to be drained on some models and the steering column dropped to the seat.It is around a 4-5 hour job.

Someone changed a heater core in my 92 firebird. it keeps dieing. is there vacume lines behind dash?

i took off dash. but cant find any vacume lines.
Someone changed a heater core in my 92 firebird. it keeps dieing. is there vacume lines behind dash?
There are vacuum lines in the dash, but if your not getting any heat, check the cables that operate the blend air doors. They are cable operated, not vacuum. Also make sure that the heater box ( the plastic housing that has the heater core in it), and make sure it's sealed. If there's outside air getting in there, it will affect the heat in the car.
Someone changed a heater core in my 92 firebird. it keeps dieing. is there vacume lines behind dash?
there are some vacum lines connected to the selector switch for the heat a/c control,however,your problem may be as simple as not having enough coolant in your system.

Heater core in Chevy Tracker?

Does anyone know how big a job it is to change a heater core in a 2000 Chevy Tracker? I was told by a local garage the heater core itself was only available from Chevy and cost $300! Does this sound right? Thanks.
Heater core in Chevy Tracker?
Changing the heater core on a '00 Tracker is moderately difficult. To do it right you must remove the entire dash pan (just like a Ford), but besides that it's easy. The problem with removing the dash pan is the you will probably never get all the rattling out after you reinstall in. As far as getting the core you local parts store should be able to get it for you. You can go to www.advanceautoparts.com or www.autozone.com and check on-line to make sure. If they can get it and you don't mind using used parts go to www.junkyarddog.com (it will link you national salvage yards) good luck.
Heater core in Chevy Tracker?
contact buy-oem-parts for the best price on the part

How do you remove the heater core from a 92 eagle premier?

its overheating...

i changed the water pump and flushed the radiator..

i guess the heater core is next but dont know how to get it out,
How do you remove the heater core from a 92 eagle premier?
Hi , If it isn't leaking don't go there yet. Do the thermostat first.
How do you remove the heater core from a 92 eagle premier?
Hi, Anthony I hope this can get to you some how. What you have going on is an air lock. Keep the tank resoivor full and warm up the engine and let it cool down many times till it works right. Some times I have to park it on a steep hill. Good luck Paul

Report Abuse

Does some noes how hard to change a heater core on a 1997f150?

I do believe it's behind the glove compartment. If you are decently good with tinkering it should take no more than two hours.
Does some noes how hard to change a heater core on a 1997f150?
hard is only that one has to lay in odd way to get to screws and like other one said couple hours work to remove everything only tip i can give is grease the hoses really well and dont twist on them to much when push back on an dreplace the hoses while you got it all a part might fine

repair manual type this dont think you will need it not much more than removing a lot of screws really thats the hard part you have to lay side ways or upside down to do it

repair manual 1997 ford f150 PDF

healthy hair

hair ideas

98 ford ranger 3.0 anyone know of the easy way to change a heater core?

Nope. Since 93 you've had to remove the whole dashboard to get to it. Not a pretty job.
98 ford ranger 3.0 anyone know of the easy way to change a heater core?
by the book. do it by the book.
98 ford ranger 3.0 anyone know of the easy way to change a heater core?
pay some one to do it call around to find the best deal
the easiest way is to pay a professional to do it...the entire dash board and air distribution box must be removed - not really a job for an amateur.